Leon Mk2
| Cooling system components, bodywork side - Assembly overview |
| 1 - | Radiator/cooler |
| q | removing and fitting → Chapter |
| q | Renew coolant after replacing |
| 2 - | Spring-type hose clip |
| q | Remove and install with hose clip pliers -VAS 6340-. |
| 3 - | Upper coolant hose |
| q | Coolant hose schematic diagram → Chapter. |
| 4 - | Cowling |
| q | removing and fitting → Chapter |
| 5 - | Sealing plug |
| q | Check using the cooling system tester -VAG 1274B- and the adaptor -VAG 1274/9- |
| q | The pressure release valve should open at a pressure of 1.4 - 1.6 bar. |
| 6 - | 5 Nm |
| 7 - | Expansion tank |
| q | Perform cooling system leakage check with cooling system tester -VAG 1274B- and the adaptor -VAG 1274/8- |
| 8 - | Radiator fan 2 -V177- |
| q | removing and fitting → Chapter |
| 9 - | Radiator fan -V7- |
| q | With radiator fan control unit -J293-. |
| q | removing and fitting → Chapter |
| 10 - | Spring retainer |
| q | For connector. |
| 11 - | Lower coolant hose |
| q | To connection for thermostat. |
| 12 - | Spring-type hose clip |
| q | Remove and install with hose clip pliers -VAS 6340-. |
| 13 - | Clip |
| 14 - | Radiator outlet coolant temperature sender -G83- |
| 15 - | 5 Nm |
