seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
check operation and electricity supply > < Fuel gauge sendersG: Removing and installing.

Leon Mk2

Fuel pump and fuel system: checking
Fuel pump and fuel system: checking
→ Chapter „check operation and electricity supply“
→ Chapter „Checking fuel pressure“
→ Chapter „Checking residual pressure“
→ Chapter „Testing quantity of fuel delivered“
→ Chapter „Checking current draw“
  Note
After removing fuel delivery unit, check fuel tank for heavy soiling and clean if necessary.
   
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
t  Pressure tester -VAS 6550-
t  Remote control -VAG 1348/3A-, please see Correspondence → Anchor
t  Test instrument adapter/DSO (5-pin) -VAS 5565-
t  Digital multimeter -VAG 1715-, see equivalent → Anchor
t  Spanner -3217-, see equivalent → Anchor
t  Torque wrench -VAG1332-, see equivalent → Anchor.
t  Measuring container, capacity 2 litres

   

check operation and electricity supply > < Fuel gauge sendersG: Removing and installing.