seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Seal for the camshaft: replacement|Fitting > < Seal for the camshaft: replacement

Leon Mk2

Removing
Removing
–  Remove the upper toothed belt guard.
–  Loosen the camshaft cogwheel (using the retention tool -T20018A-).
   
–  Make the mark on the camshaft cogwheel and the mark on the toothed belt protection coincide.
–  Release the tension roller and remove the toothed belt.
–  Remove the cogwheel from the camshaft.
–  Remove the half-moon pin from the camshaft.
  V13-1217
–  Insert the extractor tool -T20143- and remove the oil seal.
  E15-0250

Seal for the camshaft: replacement|Fitting > < Seal for the camshaft: replacement