seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel delivery unit: removing and fitting|Fitting > < Fuel delivery unit: removing and fitting

Leon Mk2

Removing
Removing
  Note
To carry out this work it is necessary to disconnect battery earth strap. The vehicle should be checked for a fitted radio. If necessary, obtain the anti-theft code for the radio first.
–  Observe the security precautions before beginning removal → Chapter.
–  With the ignition switched off disconnect battery earth strap.
Commercial vehicles
–  Separate partially the forward part of the carpet in the load bay.
   
–  Remove the floor protection plates -3-.
–  Remove the reinforcement beam.
Kombi versions
–  Move rear seat forward.
Continued for all vehicles
–  Remove the cover from the fuel supply unit.
  E20-0068
–  Separate the connector -1-.
–  Remove the feed and return tubes -4- y -3- going to the fuel delivery unit.
  WARNING
Fuel supply pipes are under pressure. Before removing fuel hose connections wrap a cloth around the connection to be separated. Then release pressure by carefully pulling hose from connection.
  E20-0069
–  Remove the connection nut using the rotation tool -U-40055A-.
  E20-0003
–  Remove the fuel delivery unit. For this, it is necessary to rotate the assembly to the left using the -U-40073- until this is released from its lower attachment (bayonet type).
  Note
If the delivery unit is to be replaced then drain old delivery unit before disposal.
  E20-0070

Fuel delivery unit: removing and fitting|Fitting > < Fuel delivery unit: removing and fitting