SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4 cylinder injection engine (1.4 Litre, 2 valves), mechanical | Fuel supply, gas operation | Fuel delivery unit: removing and fitting

Fuel level sender: removing and fitting

Removing

–	Remove the fuel delivery unit → Chapter.

–	Release and pull off the terminals for wires -3- and-4-.

–	Lift retaining tabs -1- and -2- with a screwdriver and disconnect fuel gauge sender upwards -arrows-.

Fitting

For fitting, the operations are carried out in reverse order, taking the following into account:

–	Insert fuel level sender in the guides on the fuel delivery unit and push down until it engages.

–	Fit the fuel delivery unit → Chapter.

SEAT Workshop Service and Repair Manuals