seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Replacing valve shaft seals.|Installation > < Replacing valve shaft seals.

Leon Mk2

Removal:
Removal:
(With cylinder head installed)
–  Remove camshaft housing → Chapter.
–  Remove roller rocker arms and place on a clean surface. Ensure that roller rocker arms are not mixed up.
–  Remove the spark plugs using the spark plug spanner -3122 B-.
–  Set piston of respective cylinder to „bottom dead centre“.
   
–  Attach valve spring tool -3362- with thrust piece -3362/1-.
–  Screw in the pressure hose -VW 653/3- into the spark plug thread.
–  Connect pressure hose to compressed air system supplying at least 6 bar and remove valve springs.
–  Pull off valve stem seals using valve stem seal puller -3364-.
  N15-0081

Replacing valve shaft seals.|Installation > < Replacing valve shaft seals.