| –
| Push the installation socket -C- by hand in the direction of the arrow until the sealing lip pressure ring -B- sits on the crankshaft flange -A-. |
| –
| Push guide pin for petrol engines (red knob) -F- into hole in crankshaft. In this way, the final fitting position of the sender wheel is established. |
Note | The guide pin for diesel engines (black knob) -D- must not be inserted in threaded hole of crankshaft. |
| –
| Hand-tighten both hexagon socket head bolts of assembly tool. |
| –
| Tighten the hexagonal bolt -E- on the threaded spindle until it comes into contact with the installation bell -C-. |
|
|
|
