seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Crankshaft > < E - Check the fitting position of the sender wheel on the crankshaft.

Leon Mk2

F - Re-pressing sender wheel
F - Re-pressing sender wheel
   
–  Secure assembly tool -T10134- to crankshaft flange using hexagon socket head bolts -A-.
–  Hand tighten both hexagon socket head bolts.
–  Move the fitting device -T10134- by hand onto the sealing flange.
  N13-10044
–  Tighten the hexagonal bolt -E- on the threaded spindle until it comes into contact with the installation bell -C-.
  N13-10084
–  Tighten hexagon nut of assembly tool -T10134- to 40 Nm using torque wrench -V.A.G 1331- and tool insert 24 mm -V.A.G 1332/11-.
–  Check the fitting position of the sender wheel on the crankshaft once more → Chapter.
If dimension -a- is too small again:
–  Tighten hexagon nut for assembly tool -T10134- to 45 Nm.
–  Check the fitting position of the sender wheel on the crankshaft once more → Chapter.
  N13-10085

Crankshaft > < E - Check the fitting position of the sender wheel on the crankshaft.