seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Repairing electronic power control (EPC) > < Removing and installing fuel gauge senderG

Leon Mk2

Removing and installing suction-jet pump
Removing and installing suction-jet pump
Special tools and workshop equipment required
   
t  Spanner -T10202-
  W00-1334
t  Torque wrench (40 - 200 Nm) -V.A.G 1332-
Removing:
–  Remove fuel delivery unit → Chapter.
–  Disconnect flange on left from the fuel tank and remove.
  W00-0428
–  Unclip suction-jet pump -1- from the base of the fuel tank and pull it out of the opening in fuel delivery unit.
Installing:
Installation is carried out in reverse order. Note the following:
–  Ensure that suction-jet pump is fitted securely the base of the fuel tank.
–  Install fuel delivery unit → Chapter.
  N20-10798

Repairing electronic power control (EPC) > < Removing and installing fuel gauge senderG