Leon Mk2
| Ignition system - exploded view |
| 1 - | Electric connector |
| q | Black, 4 contacts |
| q | With assembly tool -T10118-. |
| 2 - | Ignition coil 3 with output stage -N291- |
| q | Ignition coil 1 with output stage -N70- |
| q | Ignition coil 2 with output stage -N127- |
| q | Ignition coil 4 with output stage -N292- |
| q | Removing and installing → Chapter. |
| 3 - | Electric connector |
| q | Black, 2 contacts |
| q | For knock sensor 1 -G61-. |
| q | Connector contacts are gold-plated |
| 4 - | Knock sensor 1 -G61- |
| q | Connector contacts are gold-plated |
| q | To remove, remove supercharger → Chapter. |
| 5 - | 20 Nm |
| q | Tightening torque affects the knock sensor function |
| 6 - | Electric connector |
| q | Black, 3 contacts |
| q | for Hall sender -G40- |
| 7 - | Hall sender -G40- |
| 8 - | O ring |
| q | Replace if damaged |
| 9 - | 10 Nm |
| 10 - | Spark plug, 25 Nm |
| q | Remove and install with spark plug socket and extension -3122 B-. |
| q | Type and electrode gap → Chapter. |
| 11 - | Wiring guide |
| q | Bolt to camshaft housing with 5 Nm torque. |
| 12 - | Negative wire |
| q | Loosen or tighten only with ignition switched off. |
| 13 - | 10 Nm |
| q | Loosen or tighten only with ignition switched off. |