seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Vehicles with air conditioning/heating: additional instructions and assembly information > < Removing and positioning the engine|Installation

Leon Mk2

Tightening torques
Tightening torques
   
Bolt union Tightening torque
Bolts, nutsM 610 Nm
 M 820 Nm
 M 1045 Nm
 M 1260 Nm
Exhaust pipe to manifold 40 Nm

Assembly mountings
  Note
Securing bolts for assembly mountings are stretch bolts and must be renewed.
   
Engine assembly mountings
A - 20 Nm + retighten by 90° (1/4 turn)
B - 30 Nm + retighten by 90° (1/4 turn)
1)Replace
  N10-10306
Gearbox assembly mounting
A - 40 Nm + retighten by 90° (1/4 turn)
B - 50 Nm + retighten by 90° (1/4 turn)
C - 50 Nm + retighten by 90° (1/4 turn)
1)Replace
  N10-0339
Pendulum support
A - 30 Nm + retighten by 90° (1/4 turn)
B - 40 Nm + retighten by 90° (1/4 turn)
1)Replace
  N10-10307

Vehicles with air conditioning/heating: additional instructions and assembly information > < Removing and positioning the engine|Installation