–
| Push the installation socket -C- by hand in the direction of the arrow until the sealing lip pressure ring -B- sits on the crankshaft flange -A-. |
–
| Push guide pin for petrol engines (red knob) -F- into hole in crankshaft. In this way, the final fitting position of the sender wheel is established. |
Note The guide pin for diesel engines (black knob) -D- must not be inserted in threaded hole of crankshaft. |
–
| Tighten the two hexagon socket head bolts of the assembly tool hand-tight. |
–
| Screw the hexagon nut -E- onto threaded spindle by hand until it lies against the assembly housing -C-. |
|
|
|