seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing gas tank valveN495 > < Sender for the gas supply displayG707

Leon Mk2

Fuel level sender: removing and fitting
Fuel level sender: removing and fitting
Removal:
Carry out the following work:
   
–  Release latch -1- and remove protective cover -2-.
–  Emptying the Autogas tank → Chapter
  WARNING
There is a danger of injury due to escaping gas.
The system is under pressure.
Wear suitable protective measures, such as protective gloves and protective goggles.
Before opening the system place a cloth around the connection. Then release pressure by carefully loosening the connection.
–  Disconnect the plug connector to the Sender for the gas supply display -G707-.
  N01-10928
–  Remove bolts -arrows-.
–  Carefully pull fuel gauge sender out of fuel tank.
Installation
Installation is carried out in reverse order.
Tightening torque of the bolts -arrows-: 9.7 Nm
  N20-10782

Removing and installing gas tank valveN495 > < Sender for the gas supply displayG707