SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4 cylinder Injection engine (1.6 l engine, BiFuel) | Mixture preparation system, electronic inj.,Gas | Injection system | Fuel rail, removing and installing gas rail

Removal:

–	Remove the air filter housing → Chapter.

–	Undo the connector -4- from the fuel rail „Gas rail“.

WARNING

There is a danger of injury due to escaping gas.

The system is under pressure.

Wear suitable protective measures, such as protective gloves and protective goggles.

Before opening the system place a cloth around the connection. Then release pressure by carefully loosening the connection.

–	Slacken the clamp -arrow 2- and remove the gas hose.

–	Remove bolts -1-.

–	Unplug connector -3- from the gas distribution rail sensor -G401-.

–	Loosen the clamps and remove the hoses -arrows- from the fuel rail.

SEAT Workshop Service and Repair Manuals