seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel rail with injectors - Assembly overview > < Removal:

Leon Mk2

Installation
Installation
Installation is carried out in the reverse sequence; note the following:
–  Move all hoses to the correct installation position - using the markings.
–  Route the cable lines correctly using the respective clips in the process.
–  Replace the O-rings of the low pressure valve → Item.
–  Installing fuel rail → Anchor
–  Check coolant level.
–  Bleeding the fuel system → Chapter.
–  Install air cleaner housing → Chapter.
   
Bolt union Tightening torque
Crankcase breather preheater 3 Nm
Vacuum valve  10 Nm
Intake manifold 20 Nm
Fuel rail 7 Nm

   

Fuel rail with injectors - Assembly overview > < Removal: