SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Remove and install the bottom cover of the timing chain >
< Valve 1 for camshaft adjustmentN205 Removing and installing
Leon Mk2
Power unit
4 cylinder Injection engine (2.0l, 4V Direct injection, turbocharger and chain control)
Engine cylinder head, valve gear / Chain drive
Removing and installing timing chain cover (top)
Removing and installing timing chain cover (top)
Removing and installing timing chain cover (top)
Special tools and workshop equipment required
t
Torque wrench -V.A.G 1783-
t
Insertable tool with e/c 10 opening -V.A.G 1783/1-
Removing:
–
Push coolant hoses to one side and secure with cable ties.
–
Remove bolts
-arrows-
.
–
Removing inlet camshaft control valve 1 -N205-.
–
Unscrew bolts
-1…5-
and remove upper timing chain cover.
Installing:
–
Lubricate seal and O-ring with engine oil.
–
Tighten the bolts
-1 to 5-
by hand in the sequence specified:
–
Retighten bolts to 9 Nm using torque wrench -V.A.G 1783- and open end spanner insert (10 mm) -V.A.G 1783/1-.
l
Tightening torques
→ Chapter
Further assembly is basically the reverse of the dismantling sequence.
Power unit
4 cylinder Injection engine (2.0l, 4V Direct injection, turbocharger and chain control)
Engine cylinder head, valve gear / Chain drive
Removing and installing timing chain cover (top)
Remove and install the bottom cover of the timing chain >
< Valve 1 for camshaft adjustmentN205 Removing and installing