SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Engine oil >
< Removing and installing sump (top section)
Leon Mk2
Power unit
4 cylinder Injection engine (2.0l, 4V Direct injection, turbocharger and chain control)
Engine lubrication / Sump and oil pump
Removing and installing valve for oil pressure controlN428
Removing and installing valve for oil pressure controlN428
Removing and installing valve for oil pressure control -N428-
Special tools and workshop equipment required
t
Used oil collection and extraction unit -V.A.G 1782-
Removing:
–
Remove noise insulation
→ Rep. gr.66
.
–
Position used oil collection and extraction unit -V.A.G 1782- below engine.
–
Unplug electrical connector
-1-
.
–
Unscrew bolt
-2-
and pull out oil pressure control valve -N428-
-3-
.
Note
Push poly V-belt to one side.
Installing:
l
Tightening torque
→ Item
Installation is carried out in the reverse order; note the following:
t
Renew O-ring.
Power unit
4 cylinder Injection engine (2.0l, 4V Direct injection, turbocharger and chain control)
Engine lubrication / Sump and oil pump
Removing and installing valve for oil pressure controlN428
Engine oil >
< Removing and installing sump (top section)