Leon Mk2
| Silencers with suspension elements - Components overview |
| 1 - | Seal |
| q | replace |
| 2 - | 25 Nm |
| q | replace |
| 3 - | Front silencer |
| 4 - | Separating point |
| q | Marked by impressions on exhaust pipe. |
| q | Cut through exhaust pipe with pneumatic sabre saw -V.A.G 1523A- or chain pipe cutter -VAS 6254- at right angles at the separating point → Chapter |
| 5 - | Secondary silencer |
| q | Stress-free alignment of exhaust system |
| 6 - | Suspension |
| q | If this is damaged, replace it |
| 7 - | Support |
| q | 25 Nm |
| 8 - | Attachment bush |
| q | Mounting position and specified torque → Chapter |
| q | Tighten bolted connections evenly. |
