seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing throttle valve moduleJ338 > < Injection valves: Clean

Leon Mk2

Removing and installing fuel pressure senderG247
Removing and installing fuel pressure sender -G247-
Special tools and workshop equipment required
   
t  attachment tool -T10118-
  W00-1148
t  "Deep hexagon socket, 27 mm" -VAS 5301/7-
Removing:
  WARNING
The fuel system is pressurised. The pressure in the high-pressure components of the injection system must be reduced to a residual pressure prior to opening.
High pressure system pressure reduction → Chapter.
  W00-10662
–  Remove retainer from top of alternator -C--arrow-.
  N24-10497
All:
–  Detach coolant pipe from intake manifold -arrows-.
  A24-10446
–  Release connector on fuel pressure sender -G247- using assembly tool -T10118-.
–  Unscrew fuel pressure sender -G247- using "Deep hexagon socket, 27 mm" -VAS 5301/7-.
–  Collect escaping fuel with a cleaning cloth.
Installing:
Installation is carried out in the reverse order; noting the following in the process:
Lubricate sealing cone of fuel pressure sender -G247- with clean engine oil.
–  Tightening torques → Chapter
  A24-10445

Removing and installing throttle valve moduleJ338 > < Injection valves: Clean