Leon Mk2
| Secondary air system: assembly overview |
| 1 - | Combination valve |
| q | Checking → Chapter |
| 2 - | 10 Nm |
| 3 - | O ring |
| q | Replace in case of damages |
| 4 - | Pressure hose |
| q | Check for secure seating |
| q | Press together at front to release. |
| 5 - | Suction hose |
| q | For secondary air pump |
| 6 - | To air cleaner |
| 7 - | Secondary air pump motor -V101- |
| 8 - | Electrical connector |
| q | Two-pin |
| 9 - | 10 Nm |
| 10 - | 25 Nm |
| 11 - | 8 Nm |
| 12 - | Retainer |
| q | For secondary air pump |
| q | Secured to intake manifold |
| 13 - | Intake manifold lower part: |
| 14 - | 10 Nm |
| 15 - | Seal |
| q | Note fitting position: |
| q | Renew |
| 16 - | Joint mouth |
| q | For combination valve |
