seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Paper filter of the evaporator: replace > < Fuel filter (Gas filter): replace

Leon Mk2

Gas filter: Removing and installing
Gas filter: Removing and installing
Check the tool and equipment equivalence table according to the applicability between Seat / VW / Audi / Skoda → Chapter
Special tools and workshop equipment required
   
t  Gas leak detector -VAS 6227-
  W00-10511
t  Torque wrench -VAG 1410-
  W00-0554
Removal:
–  Loosen the screw clips -arrows- of the filter -1-.
–  Separate the gas hoses from the connecting positions and remove the filter -1-.
Installing
–  Fit the new filter between the hose connecting positions.
  Note
Observe the fitting direction markings on the filter.
–  Mount and tighten the brackets.
  N01-10804
Tightening torques of the screw clips: 4 Nm
–  After completing the assembly, use the Gas leak detector -VAS 6227- to carry out an inspection on the screw connections -arrows- of the autogas filter -1-.
  N01-10804

Paper filter of the evaporator: replace > < Fuel filter (Gas filter): replace