seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Valve for the gas tankN495: Removing and installing > < Removing and installing Sender for the gas supply displayG707

Leon Mk2

Fuel level sender: removing and fitting
Fuel level sender: removing and fitting
Removal:
Perform the following work:
   
–  Unscrew bolts -1- and detach cover -2-.
–  Liquified gas tank: Draining → Chapter.
  N01-10797
–  Remove the gas line -1- and the angle screw connection -2-.
–  Disconnect the plug connector to the Sender for the gas supply display -G707-.
  N20-10685
–  Remove bolts -arrows-.
–  Carefully remove the sender for the gas supply display from the fuel tank.
Installing
Installation is carried out in reverse order.
  N20-10687
Tightening torque of the bolts -arrows-: 9.7 Nm
  N20-10687

Valve for the gas tankN495: Removing and installing > < Removing and installing Sender for the gas supply displayG707