Leon Mk2
| Part II |
| 1 - | Sealing plug 40 Nm |
| 2 - | O- ring |
| q | If the sealing ring is leaking, nip open and replace the o-ring |
| 3 - | Spring |
| q | For relief valve approx. 4 bar |
| 4 - | Piston |
| q | For relief valve approx. 4 bar |
| 5 - | Gasket |
| q | Replacement |
| 6 - | Uni-directional valve, 8 Nm |
| q | Integrated in the oil filter bracket |
| 7 - | O-Ring |
| q | Replacement |
| q | Fit as far as the shoulder of the tube → Item |
| 8 - | Tube |
| q | Cylinder block breather |
| 9 - | Securing clip |
| 10 - | Sealing plug 15 Nm |
| 11 - | O- ring |
| q | If sealing ring is leaking nip open and replace seal. |
| 12 - | Oil pressure switch -F1-, 1,4 bar, 25 Nm |
| q | Black |
| q | Checking → Chapter |
| 13 - | O- ring |
| q | If sealing ring is leaking nip open and replace. |
| 14 - | 15 Nm + 1/4 turn (90°) |
| 15 - | O-ring |
| q | Replacement |
| q | Hold with tabs provided on the oil cooler |
| 16 - | Oil filter |
| q | Loosen with turning tool -U-40078- or a universal filter extractor |
| q | Tighten by hand |
| q | Note instructions on filter when installing |
| 17 - | 25 Nm |
| 18 - | Oil cooler |
| q | Note the observations → Chapter |
| q | Ensure clearance to adjacent components |
| q | Lubricate the contact surfaces of the O-ring with the oil filter support using -AMV 188 001 02- |
| q | Connection schema for the coolant tubes → Chapter |
| 19 - | Oil filter bracket |
| q | With relief valve approx. 4 bar |
