SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Crankshaft oil seal, distribution side: removing and fitting|Fitting >
< Crankshaft oil seal, distribution side: removing and fitting
Leon Mk2
Power unit
4 cylinder injektion engine. (2.0l, 2 valve)
Enginecrankshaft group, pistons / Engine / ankshaft_oil_seal_distribution_side_removing_and_fitting/">Crankshaft oil seal, distribution side: removing and fitting
Removing
Removing
Removing
–
Remove the notched belt
→ Chapter
.
–
Remove the crankshaft cog wheel for the toothed belt using the locking tool -T20018A-.
–
Remove the oil sump
→ Chapter
.
–
Extract the bolts 1 … 6 attaching the front oil seal.
–
Remove the oil seal. If necessary, release by gently tapping with a rubber mallet.
–
Remove sealant residue on cylinder block with a flat scraper.
–
Remove sealant remains on sealing flange with a rotating plastic brush (wear protective goggles).
–
Clean sealing surface, must be free of oil and grease.
Power unit
4 cylinder injektion engine. (2.0l, 2 valve)
Enginecrankshaft group, pistons / Engine / ankshaft_oil_seal_distribution_side_removing_and_fitting/">Crankshaft oil seal, distribution side: removing and fitting
Removing
Crankshaft oil seal, distribution side: removing and fitting|Fitting >
< Crankshaft oil seal, distribution side: removing and fitting