Leon Mk2
Exhaust silencer with exhaust supports: disassembly and assembly |
1 - | Double clamp |
q | Installation position → Fig. |
2 - | Nut and bolt, 40 Nm |
3 - | Suspension element |
q | With attachment ring |
q | Replace if damaged |
4 - | Nut, 25 Nm |
5 - | Suspension element |
q | With attachment ring |
q | Replace if damaged |
6 - | Cutting zone → Note |
7 - | Pre-silencer and post silencer → Note |
q | Fit under no tension |
1) | In the standard version, the pre-silencer and the rear silencer are made of one piece. For repairs, the pre-silencer and the rear silencer are supplied separately and with a double clamp. |
Cut the joining tube in the cutting zone, → Item, with the exhaust pipe cutter -U-40075- → Fig. |
|