seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Combination valve: removing and separation|Fitting > < Combination valve: removing and separation

Leon Mk2

Removing
Removing
   
–  Remove the engine cover -arrows-.
–  Remove the upper part of the inlet manifold → Chapter.
–  Remove flexible pressure tube from the combination valve.
–  Raise the vehicle.
–  Remove the central sound proofing (depending on the version): → Exterior; Rep. Gr.50.
–  Separate the protection for the right hand side semi axle.
–  Unscrew the lower junction from the combination valve junction tube to the exhaust manifold.
–  Lower the vehicle.
–  Unscrew the upper junction from the combination valve junction tube to the exhaust manifold.
–  Disconnect the connecter from the lambda probe -G39-.
–  Remove the hot air deflector along with the combination valve.
  E10-0123
–  Insert an allen key e/c 5 mm into the holes -3- in the hot air deflector -1- and remove the bolts -4- from the combination valve -2-.
–  Remove the combination valve.
  E26-0081

Combination valve: removing and separation|Fitting > < Combination valve: removing and separation