seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing Poly-V belt > < Poly-V belt mechanism, list of components

Leon Mk2

Removing and installing pulley crankshaft
Removing and installing pulley crankshaft
t  Removing → Anchor
t  Installing → Anchor
Removing
Requirement
l  Poly V-belt removed → Chapter.
   
–  Remove central soundproofing -Anchorage points 1 ... 3-.
  Note
To loosen and tighten the crankshaft pulley, lock the crankshaft with a ring spanner on centre bolt.
  A10-1565
–  Remove crankshaft pulley.
Installing
Continue the installation in the reverse order of removal sequence, observing the following:
  A13-0356
–  Only install crankshaft pulley with genuine bolts → ETKA (electronic parts catalogue).
t  Can only be fitted in one position: The borehole -arrow- in the pulley / crankshaft must be positioned above the raised section of the pulley.
  A13-0134

Removing and installing Poly-V belt > < Poly-V belt mechanism, list of components