–
| Screw the adapter -VAG 1318/23- and the adapter -V.A.G 1318/17-1- on to the pressure tester -VAG 1318-. |
–
| Fit the adapter -V.A.G 1318/17-1- to the disconnected fuel supply line. |
–
| Screw the adapter -V.A.G 1318/11- on to the pressure tester -VAG 1318-. Connect the auxiliary hose -arrow- and insert the other end in a measurement container. |
–
| Open cut-off tap on pressure gauge. The lever indicates the direction of flow. |
–
| Build up pressure in the fuel system; to do so, press the remote control switch and gradually close the pressure gauge shut-off tap, until it indicates:. |
l
| Specification: approx. 4 bar |
–
| From this point on do not move position of cut-off tap. |
–
| Empty measuring container. |
–
| Press remote control switch for 15 seconds. |
|
|
|