Exhaust system for vehicles with front wheel drive and particle filter, engine code BMN |
Note t
| The connection element on the primary exhaust tube should not be bent more that 10 º, otherwise it may be damaged. |
t
| After completing work on the exhaust system ensure that it is tension-free and remains at a sufficient distance from the bodywork. If necessary, loosen the clamp and align the silencer and the exhaust pipe so that there is always a sufficient distance from the bodywork and is evenly distributed over the suspension elements. |
t
| Renew self-locking nuts. |
t
| Exhaust system: checking for leaks → Chapter |
t
| Front part of the exhaust tube with particle filter - mounting overview, vehicles with engine code BMN → Chapter |
t
| Exhaust system: Component overview, vehicles with engine code BMN → Chapter |
t
| Particle filter for front wheel drive vehicles, engine code BMN: removing and fitting → Chapter |
t
| Centre and secondary silencers: separate → Chapter |
t
| Exhaust system: install free of tension → Chapter |
|
|
|