Direct diesel injection system control unit: repairs |
The direct diesel injection system control unit is fitting with a fault memory. Before any repair work or fitting work, consult the fault memory. |
t
| Component locations, vehicles with engine code AZV, BKD → Chapter |
t
| Component locations, vehicles with engine code BMN → Chapter |
t
| Air mass gauge -G70- removing and fitting → Chapter |
t
| Intake manifold flap motor -V157-: Removing and fitting, vehicles with engine codes AZV - BKD → Chapter |
t
| Intake manifold flap motor -V157-: removing and fitting, vehicles with engine identification letter BMN → Chapter |
t
| Engine speed sender -G28-: removing and fitting → Chapter |
t
| Supercharger pressure sensor -G31- with intake air temperature sensor -G42-: Removing and installing, vehicles with engine codes AZV - BKD → Chapter |
t
| Supercharger pressure sensor -G31- with intake air temperature sensor -G42-: removing and installing, vehicles with engine code BMN → Chapter |
t
| Pre-wiring for injector-pump unit and spark plugs - Assembly overview → Chapter |
t
| Pre-wiring for injector-pump unit and spark plugs: removing and fitting → Chapter |
t
| Injector-pump: removing and fitting → Chapter |
t
| Injector pump units: cleaning, vehicles with engine codes BMN → Chapter |
t
| O-rings for the injector pump: replace → Chapter |
t
| Verification of cables and components using the test box -V.A.G 1598/42- → Chapter |
|
|
|