seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Test the excitation > < Test process

Leon Mk2

Test the voltage supply
Test the voltage supply
   
–  Test the voltage supply with the multimeter and auxiliary leads of the -V.A.G. 1594 A- between contacts 2 + 4 of the detached connector.
–  Switch on the ignition. Target value: 11.5 V min
–  Switch off the ignition.
If there is no voltage:
  N28-0133
–  Test for open circuits in the wiring between the 4-contacts connector, contact 2 and the relay panel, following the wiring diagram. Wire resistance: 1.5 Ω max.
–  Test for open circuits in the wiring between the 4-contacts connector, contact 4 and earth, following the wiring diagram. Wire resistance: 1.5 Ω max.
  A24-0094

Test the excitation > < Test process