Leon Mk2
|
a b c Z α β | AER = Ø 29,8 mm AEX = Ø 34,4 mm = Max. touching up measure allowed* = 2.0 mm max. = Bottom edge of the cylinder head = 45° Valve seating angle = 30° Upper correction angle |
Note!
|
|
a b c Z α β | AER = Ø 29,8 mm AEX = Ø 34,4 mm = Max. touching up measure allowed* = 2.0 mm max. = Bottom edge of the cylinder head = 45° Valve seating angle = 30° Upper correction angle |
Note!
|