seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Vehicles with air conditioning > < Vehicles with accelerator cable
Continued for all vehicles
Continued for all vehicles
–  Remove air filter together with air intake connecting piece: → Chapter
–  Disconnect fuel supply and fuel return pipes at fuel rail.
  Caution
Fuel supply pipes are under pressure! Before removing from hose connection wrap a cloth around the connection. Then release pressure by carefully pulling hose off connection.
–  Pull vacuum and breather hoses off engine.
–  Pull connectors off thermo-switch and radiator fan.
–  Separate front exhaust pipe from exhaust manifold → Chapter , exhaust manifold, front exhaust pipe and catalyst with attachments.
–  Disconnect control cable from clutch: → Rep. Gr.30
–  Disconnect selector mechanism from gearbox: → Rep. Gr.34
–  Open and close the expansion tank sealing cap to release pressure in cooling system.
–  Drain coolant → Chapter.
–  Loosen hose clips and pull coolant hoses off coolant thermostat housing.
–  Loosen belt pulley securing bolts from power steering vane pump.
–  Remove ribbed belt → Chapter.
–  Unbolt power steering vane pump and secure to sub-frame with wire; hoses remain connected: → Running gear; Rep. Gr.48
–  Remove securing clamps for power steering pressure pipe.
   

Vehicles with air conditioning > < Vehicles with accelerator cable