SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | Manual 4-cyl. injection engine (4 valves), mechanics | Engine cooling | Removing and installing cooling system parts | Radiator: removal and installation | Additional information and installation work on vehicles with air conditioning

Additional information and installation work on vehicles with air conditioning

Caution

The air conditioning refrigerant circuit must not be opened.

Note!

To prevent damage to condenser and refrigerant pipes/hoses, ensure that pipes and hoses are not stretched, kinked or bent.

–	Remove retaining clamp(s) from refrigerant pipes.

–	Unbolt condenser from radiator and secure to lock carrier.

–	Unbolt air conditioning fluid reservoir and allow to hang free.

–	Remove condenser from radiator and pull forward as far as is possible.

–	Pull radiator out carefully, downwards.

SEAT Workshop Service and Repair Manuals