SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Camshaft housing removal and installation >
< Work sequence
Leon Mk2
Power unit
Manual 4-cyl. injection engine (4 valves), mechanics
Engine cylinder head, valve gear / Cylinder head: removal and installation / othed_belt_removing_installing_and_tensioning/">Toothed belt: removing, installing and tensioning
Tightening torques
Tightening torques
Tightening torques
Note!
The assembly mounting securing bolts are stretch bolts and must be replaced.
Engine assembly mounting
A = 40 Nm + 90° (1/4 turn) further
B = 50 Nm
C = 20 Nm + 45° (1/8 turn) further
–
Install ribbed belt
→ Chapter
.
–
Interrogate fault memory:
→ Vehicle diagnosis, testing and information system VAS 5051
Power unit
Manual 4-cyl. injection engine (4 valves), mechanics
Engine cylinder head, valve gear / Cylinder head: removal and installation / othed_belt_removing_installing_and_tensioning/">Toothed belt: removing, installing and tensioning
Tightening torques
Camshaft housing removal and installation >
< Work sequence