seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Crankshaft oil seal -belt pulley end: renew|Installation > < Crankshaft oil seal -belt pulley end: renew

Leon Mk2

Removal
Removal
–  First remove main drive toothed belt → Chapter.
–  Remove crankshaft toothed belt sprocket. For this, screw counter support -T20018- to toothed belt sprocket.
–  Unscrew the inner part of oil seal extractor -T20031- (Ø 32 mm) from the outer part.
   
–  Lubricate threaded head of oil seal extractor -T20031- (Ø 32 mm), place it in position and exerting firm pressure screw it into oil seal as far as possible.
–  Turn the inner part against the crankshaft until the seal has been removed.
  E13-0069

Crankshaft oil seal -belt pulley end: renew|Installation > < Crankshaft oil seal -belt pulley end: renew