Leon Mk2
Silencer with mountings |
1 - | Front exhaust pipe with catalytic converter |
q | Catalytic converter Check (engine codes AUB) → Chapter |
2 - | Marking |
q | Three times on circumference |
q | S = Manual gearbox A = Auto. gearbox |
3 - | Double clamp |
4 - | Dimension -a- = approx. 5 mm |
5 - | Mushroom head screw |
6 - | 23 Nm |
7 - | Front silencer → Note |
q | Insert in double clamp to marking |
8 - | Mounting |
q | Renew if damaged |
9 - | Connecting piece |
10 - | 15 Nm |
11 - | Mounting |
q | Renew if damaged |
12 - | Tighten to 22 Nm + continue tightening 1/4 turn (90°) |
q | Renew |
13 - | Rear silencer → Note |
14 - | Mounting |
q | Renew if damaged |
15 - | Marking |
q | Visible from below |
q | Double clamp for repairs → Item |
16 - | Double repairclamp |
q | Must be slid onto the markings → Item |
17 - | Separating point |
q | For repair cases → Note |
q | Marked by impressions on connecting pipe |
|