seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Test sequence > < Checking activation
Check conditions
Check conditions
l  All fuses must be OK.
l  Battery voltage at least 11.5 V
l  All electric consumers, e.g.: lights and rear window heater must be switched off.
l  If the vehicle is equipped with air conditioning, this must be switched off.
l  Earth connection between engine (on gearbox bell housing) and body (below battery) OK.
l  Earth connection in plenum chamber OK.
l  The engine speed sender nust be in good working order, check → Chapter.
l  The Hall sender must be in good working order; check → Chapter.
l  The petrol pump relay must be in good state.
   

Test sequence > < Checking activation