seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Check conditions > < Checking voltage supply
Throttle valve control part: checking
Throttle valve control part: checking
Components of throttle valve control part -J338-: Throttle valve positioner -V60-, throttle valve positioner potentiometer -G88-, throttle valve potentiometer -G69- and idling switch -F60-
  Note!
Only gold-plated contacts may be used when servicing the throttle valve control part connector contacts.
If the control unit is replaced you must:
t  Match engine control unit to the throttle valve control part → Chapter
Special tools and workshop equipment required
t  Fault reader -V.A.G 1551- or vehicle system tester -V.A.G 1552- with cable -V.A.G 1551/3A-
t  Test box -V.A.G 1598/22-
t  Hand multimeter -V.A.G 1526- or multimeter -V.A.G 1715-
t  Adapter set -V.A.G 1594-
t  Current flow diagram
   

Check conditions > < Checking voltage supply