–
| Pull 8-pin connector off throttle valve control part -arrow-. |
If display jumps to part throttle: |
–
| Press keys 0 and 6 for the “End output” function and confirm input with the Q key. |
–
| Replace throttle valve control part → Item. |
If display remains on part throttle: |
–
| Press keys 0 and 6 for the “End output” function and confirm input with the Q key. |
–
| Check voltage supply of throttle valve control part and wiring to control unit → Chapter. |
If the voltage supply and wiring is OK: |
|
|
|