seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Checking idling switch > < Engine operating conditions: checking
Throttle valve control unit: checking
   
Throttle valve control unit: checking
  Note!
Basic setting should always be performed whenever the throttle valve control unit -J338- is fitted, removed, or replaced → Chapter.
Special tools and workshop equipment required
t  Hand multimeter -V.A.G 1526 A- or multimeter -V.A.G 1715-
t  Fault reader -V.A.G 1551- or vehicle system tester -V.A.G 1552- with cable -V.A.G 1551/3B-
t  Auxiliary measuring set -V.A.G 1594 C-
t  Test box -V.A.G 1598/18-
t  Current flow diagram

   

Checking idling switch > < Engine operating conditions: checking