Leon Mk2
|
| 1 - | All-wheel drive control unit -J492- |
| q | Calibrated with coupling opening control valve -N373-. |
| q | Always renew together with valve |
| q | Removing and installing → Chapter>>>>>>>> |
| 2 - | Bolt, 6 Nm |
| 3 - | Cap |
| q | With vulcanised seal |
| q | Stays on control unit or on housing of Haldex coupling when control unit is removed |
| q | Always replace. |
| 4 - | Coupling opening control valve -N373- |
| q | Calibrated to match four-wheel drive control unit -J492- |
| q | Always renew together with control unit |
| q | Removing and installing → Chapter>>>>>>>> |
| 5 - | Seal |
| q | Observe proper seating of centring lips in the groove |
| q | Moisten with high performance oil for Haldex clutches and install |
| q | Always replace. |
| 6 - | Seal |
| q | Diameter 12 mm |
| q | Moisten with high performance oil for Haldex clutches and install |
| q | Always replace. |
| 7 - | Seal |
| q | Diameter 11 mm |
| q | Moisten with high performance oil for Haldex clutches and install |
| q | Always replace. |
| 8 - | Seal |
| q | Diameter 10 mm |
| q | Moisten with high performance oil for Haldex clutches and install |
| q | Always replace. |
