seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Installing: > < Removing and installing the control unit for the multi-media system (system with video recorder)
Removing:
Removing:
Before beginning dismantling work, perform the following steps:
–  Switch off ignition and all electrical consumers and pull out ignition key.
–  Push both front seats forward.
   
–  Unscrew the securing bolts -arrow- from the right and left sides of the rear console.
  N91-0305
–  Unscrew the securing bolts -arrows- from the right and left sides of the front console.
  N91-0306
–  Raise the centre console a little and tilt it to the side.
  N91-0316
–  Reach into the centre console with your hand and press out the operating unit towards the front.
–  Detach the connector from the operating unit.
  N91-0317

Installing: > < Removing and installing the control unit for the multi-media system (system with video recorder)