| RNS system adaptation “with or without traffic information control unit” |
Note! | In newer units, adaptation of the traffic information control unit is performed by coding the navigation system, ⇒ Code navigation system, → Chapter. |
| –
| Select the diagnostic function “10 - Adaptation”. |
| –
| Use the numeric keypad on the test unit display to enter channel number “06”. |
| –
| Confirm your entry by pressing the Q key. |
| The selected channel number and the currently stored variant are displayed. |
| –
| Enter new code number, when doing this place three zeros before the 2-digit number (e.g. 00001). |
| The specification for a Alhambra with traffic information control unit is adaptation 01-active. |
| The specification for a Alhambra without traffic information control unit is adaptation 00-inactive. |
| –
| Confirm your entry by pressing the Q key. |
| –
| Confirm the save prompt by pressing the Q key. |
| The changed value has been saved. |
| –
| Terminate the diagnostic functions with “06 - End output”. |
|
|
|
