seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installation of the instrument panel > < Dash panel: Removing and installing

Leon Mk2

Removal of the instrument panel
Removal of the instrument panel
There is no need to remove the steering wheel. However, the following illustrations do not show the steering wheel to facilitate the operations of compression.
–  Pull the steering wheel with the height adjustment device, pull it right out and secure it in the lowest position.
   
–  Release the upper cover -1- of the combined steering column switch. To do this, carefully pull it upwards.
  E90-0062
–  remove the lower -1- and upper -2- bolts that secure the dash panel shade frame.
–  Remove the upper cover of the combined steering column switch.
–  Remove the dash panel shade frame by carefully releasing the retaining clips -3-. Use tool -U-30800-.
  Note
When removing the dash panel frame shade be careful not to damage the surface of the dash panel.
  E90-0063
–  Remove the upper and lower -arrows- dash panel securing bolts.
–  Pull the dash panel towards the driver´s compartment and separate the connectors from the rear part of the dash panel.
–  Remove the dash panel carefully so as not to damage its surface. To do this, protect the edges of the dash panel where the frame shade is located with masking tape and remove the panel carefully using tool -U-30800-.
  E90-0065

Installation of the instrument panel > < Dash panel: Removing and installing