seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Key operated switch to deactivate front passenger side airbagE224 > < Removing and installing footwell light

Leon Mk2

Renewing bulb of footwell light
Renewing bulb of footwell light
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
  Note
t  When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.
t  Removal and installation of both footwell lights is performed in the same way and is described as follows for just one light.
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove footwell light → Chapter.
  W00-0016
–  Release locking lugs -1- and remove heat shield -2- from light lens.
  N96-0396
–  Carefully pry bulb out of bulb holder.
–  Glass base bulb 12 V, 5 W
Installing:
Installation is carried out in reverse order.
  N96-0347

Key operated switch to deactivate front passenger side airbagE224 > < Removing and installing footwell light