SEAT Workshop Service and Repair Manuals > Leon Mk2 > Vehicle electrics | Electrical system | Lights, lamps, switches inside, anti-theft system | Lights and switches in front doors | Driver side interior locking button for central locking systemE308 | Removing and installing driver side interior locking button for central locking systemE308

Central locking deadlock function warning lampK133 > < Driver side interior locking button for central locking systemE308

Removing and installing driver side interior locking button for central locking systemE308

Removing and installing driver side interior locking button for central locking system -E308-

Special tools and workshop equipment required

t	Removal wedge -VAS 3409-

Note

When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.

Removing:

–	Switch off ignition and all electrical loads, and pull out ignition key.

–	Remove front door trim on driver side → General body repairs, interior; Rep. gr.70.

–	Carefully unclip decorative strip in door trim -1- using removal wedge -VAS 3409-.

–	Remove three securing bolts -1-, detach locking lugs -arrows- and remove cover -2-.

–	Push out trim of inner door handle -1- from door panel, release 4 locking lugs -arrows- and push out inner door handle on driver side -E308--2- from door handle trim.

Installing:

Installation is carried out in reverse order.

Vehicle electrics
Electrical system
Lights, lamps, switches inside, anti-theft system
Lights and switches in front doors / iver_side_interior_locking_button_for_central_locking_systeme308/">Driver side interior locking button for central locking systemE308
Removing and installing driver side interior locking button for central locking systemE308

Central locking deadlock function warning lampK133 > < Driver side interior locking button for central locking systemE308