seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Interior light: Removing and installing, vehicles without sun roof > < Sunroof regulator E139 : Removing and installing

Leon Mk2

Interior light: removing and fitting, vehicles with sun roof
Interior light: removing and fitting, vehicles with sun roof
Removing
   
–  Separate the diffusion glass -1- from the interior light by prising it carefully and remove it.
–  Remove the securing bolts 2 that are now visible.
–  Release the hooks by levering with a screwdriver in B and then remove the interior light with the sun roof switch from the vehicle roof 3.
–  Separate connectors 4 and 5.
Installing
  E96-0052
–  Connect the connectors -4- and -5-.
–  Fit the interior light with sun roof switch 3 on side A and secure it on the opposite side B.
–  Fit the star headed screws 2and tighten them.
–  Fit the interior light diffuser 1.
  Note
t  To replace the bulb it is only necessary to separate the diffuser glass levering carefully with tool -U-30800-.
t  The internal illumination bulb 7: 12 V / 10 W.
t  The reading light bulb 6: 12 V / 5 W.
  E96-0052

Interior light: Removing and installing, vehicles without sun roof > < Sunroof regulator E139 : Removing and installing