seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Replace the bulb for the turn signal warning light > < Remove the front turn signal
Install the front turn signal
Install the front turn signal
–  Fit the connector.
   
–  Fit the turn signal in the slot of the mudguard.
  Note!
The flanges of the turn signal must be fitted in the gaskets -arrows- of the headlight casing.
  N94-0227
–  Fit the elastic wire clamp -arrow- inside the turn signal.
  N94-0212

Replace the bulb for the turn signal warning light > < Remove the front turn signal