seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Bulb for the side light: replace > < Dipped beam light bulb: replace

Leon Mk2

Full beam light bulb: replace
Full beam light bulb: replace
Removal:
   
–  Switch off ignition and all electrical consumers and take out ignition key.
–  Turn light switch to „0“ position.
–  Unscrew bolts -arrows-.
–  Disengage solenoid valve 1 for the active carbon vessel -N80--item 1- on the air duct.
–  Remove air duct -2-.
  A10-0900
–  Remove housing cover -A- in direction of -arrow-.
–  Unplug electrical connector -1- at main beam bulb.
  E94-10222
–  Remove bulb from spring clamp -2-.
Installation
Installation is carried out in reverse order, noting the following:
–  Insert new bulb in housing; do not touch glass part of bulb with bare hands.
–  Insert the bulb in the bottom spring clamp.
–  Push bulb beyond resistance of upper spring clips into housing.
–  Plug in connector and close housing cover.
–  Secure housing cover.
  E94-10223

Bulb for the side light: replace > < Dipped beam light bulb: replace